Lily of the Valley in a Glass Artificial Early Bloomers H22cm 3pcs

1. Product and company identification

• Product name: Lily of the Valley in a Glass Artificial Early Bloomers H22cm 3pcs

• Manufacturer/Importer: IGB-Gruppe GmbH

• Address: Erlestraße 95, 45894 , Gelsenkirchen , DE, +49 209 3598 2666,

• Contact: info@igb-gruppe.de

2. Description of the product

• Intended use: Silk flowers and artificial flowers for decoration, floristry and interior design.

• Material composition:

  • Materials: textiles (e.g. polyester, silk), plastic (e.g. PE, EVA), wire, foam, paper.

  • Surfaces: Coated, colored, printed or with gloss and glitter effects.

  • Additives: metal frames, adhesives, dyes, ribbons, stems or fillers.

3. Possible dangers

• Fire hazard: Textiles, foam and plastic are highly flammable and can burn if they come into contact with open flames.

• Danger of cutting or stabbing: Wire-reinforced handles or sharp edges can cause injuries.

• Choking hazard: Small decorative elements can be swallowed by children or pets.

• Chemical exposure: Paints, coatings or adhesives can cause irritation if they come into direct contact with the skin.

• Dust generation: Old or damaged artificial flowers can give off dust that can irritate the respiratory tract.

4. Safety instructions

4.1 General safety instructions

• Keep away from children and pets, especially small parts or sharp wires.

• Keep away from open flames, sources of ignition and high temperatures.

• If you have sensitive skin or known allergies, avoid direct contact with materials.

4.2 Notes on use

1. Use artificial flowers and silk flowers for decorative purposes only.

2. If it is very dirty or dusty, clean it carefully (e.g. with a feather duster or slightly damp cloth).

3. Dispose of damaged or broken parts (e.g. wires or stems) safely to avoid injury.

4. Check products regularly for loose decorative elements to prevent swallowing.

4.3 Storage instructions

• Store in a dry, dust-free place and protected from light to minimize material aging and discoloration.

• Keep away from moisture to avoid mold growth.

• Store products flat or in suitable containers to prevent deformation.

5. First aid measures

• In case of cuts or puncture wounds: Clean and disinfect the wound and seek medical attention if necessary.

• If paints or coatings come into contact with skin: Clean thoroughly with soap and water.

• If eyes are irritated by particles or dust: Rinse immediately with clean water and seek medical advice.

• If small parts are swallowed: Do not give food or drink and seek medical attention immediately.

• If dust is inhaled: ensure fresh air supply and seek medical advice if symptoms persist.

6. Firefighting measures

• Suitable extinguishing media: CO₂, foam, powder, water.

• Special measures: Wear respiratory protection as burning may produce toxic fumes.

7. Storage and transport

• Storage:

  • Store in a dry and dust-free place.

  • Protect products from direct sunlight to prevent material aging.

• Transport:

  • Pack artificial flowers and silk flowers securely to avoid deformation and damage.

8. Disposal instructions

• Material-dependent disposal:

  • Plastic and textile-based materials: residual waste or recycling according to local regulations.

  • Wire and metal frames: recycling as metal waste.

  • Coated or painted parts: residual waste.

• Packaging materials: Recycling according to local regulations.

9. Additional information

• For further details on safe use, please refer to the instructions on the product packaging.

• Questions? Contact us at info@igb-gruppe.de.